Home › Brands › Compare Products
2024 Cub Cadet PRO Z 754 L 60 in. Kawasaki FX850V 27 hp in Greenland, Michigan
Previous Next
2024 Cub Cadet PRO Z 754 L 60 in. Kawasaki FX850V 27 hp
2024 Cub Cadet PRO Z 754 L 60 in. Kawasaki FX850V 27 hp in Greenland, Michigan
Previous Next
2024 Cub Cadet PRO Z 754 L 60 in. Kawasaki FX850V 27 hp

Specs

General Information

Manufacturer
Cub Cadet
Cub Cadet
Model Year
2024
2024
Model
PRO Z 754 L 60 in. Kawasaki FX850V 27 hp
PRO Z 754 L 60 in. Kawasaki FX850V 27 hp
Model Code
53FIHTTN050
53FIHTTN050
Color
Cub Cadet Yellow
Cub Cadet Yellow

Body

Frame

Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots

Yokes - 1/2 in. thick steel front

Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots

Yokes - 1/2 in. thick steel front

Seat

Type - Cushion with seat belts

Armrests - Padded

Suspension - High-back dial suspension with EVC, ISO mounted base (lateral suspension)

Type - Cushion with seat belts

Armrests - Padded

Suspension - High-back dial suspension with EVC, ISO mounted base (lateral suspension)

Seat Adjustment
Angle back adjust and lumbar support
Angle back adjust and lumbar support
Rollover Protection (ROPS)
2 x 2 in. spring-latch tool-less foldable 3 position
2 x 2 in. spring-latch tool-less foldable 3 position
Safety Features
Bumper - 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
Bumper - 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Drivetrain

Transmission
12 cc Hydro-Gear 4400
12 cc Hydro-Gear 4400
Travel Speed Forward
12 mph (19 km/h)
12 mph (19 km/h)
Travel Speed Reverse
6 mph (9.5 km/h)
6 mph (9.5 km/h)
Wheels/Tires

Anti-Scalping - 2 front deck gauge wheels

Tire Tread - Turf

Anti-Scalping - 2 front deck gauge wheels

Tire Tread - Turf

Drive Tires
24 x 12-12 in.
24 x 12-12 in.
Steering Tires
13 x 6.5-6 in. Reliance Carlisle run-flat
13 x 6.5-6 in. Reliance Carlisle run-flat
Axles
Front - 2 x 3 in. solid tube with ISO dampening suspension
Front - 2 x 3 in. solid tube with ISO dampening suspension
Brakes
Hand-operated lever with integrated hydro pump release lever
Hand-operated lever with integrated hydro pump release lever

Electrical

Charging System
15A regulated
15A regulated
Instrumentation
Fuel Gauge - Electronic
Fuel Gauge - Electronic
Hour Meter
Crew Boss
Crew Boss

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FX Series 850V
FX Series 850V
Cylinders
Twin
Twin
Horsepower
27 hp
27 hp
Displacement
852 cc
852 cc
Carburetion
Carburetor
Carburetor
Air Cleaner
Filter - High density
Filter - High density
Starter
Engine - Ignition key
Engine - Ignition key
Lubrication
Fully pressurized
Fully pressurized
Fuel Capacity

Dual 7.45 US gal. (28.2 l)

Oil Capacity - 2 US qt. (1.89 l)

Dual 7.45 US gal. (28.2 l)

Oil Capacity - 2 US qt. (1.89 l)

Measurements

Weight
Approx. - 1,424 lb.
Approx. - 1,424 lb.
Cutting Width
60 in.
60 in.
Mowing Height Range
1 to 5 in. in 1/4 in. increments
1 to 5 in. in 1/4 in. increments

Operational

Steering
Control - High Performance & Speed Control
Control - High Performance & Speed Control
Deck Construction
7 ga. top plate 7 ga. bottom reinforcement ¼ in. rolled leading edge
7 ga. top plate 7 ga. bottom reinforcement ¼ in. rolled leading edge
Deck Material
Fabricated 7 ga. (0.187 in.) steel shell
Fabricated 7 ga. (0.187 in.) steel shell
Deck Lift
Foot pedal with spring assist 16 Positions
Foot pedal with spring assist 16 Positions
Discharge
Chute - High-density, impact-resistant rubber
Chute - High-density, impact-resistant rubber
Spindles
Construction - 8 in. sealed cast aluminum housing (maintenance-free)
Construction - 8 in. sealed cast aluminum housing (maintenance-free)
Blades
3 high-lift Marbain® / 18,500 fpm (approx.)
3 high-lift Marbain® / 18,500 fpm (approx.)
Power Take-Off (PTO)
Electronic fingertip engagement
Electronic fingertip engagement

Other

Includes

Separate Choke

Oil Filter

Cup Holder - Intergrated into Side Pod

Separate Choke

Oil Filter

Cup Holder - Intergrated into Side Pod

Warranty

3 year / no hour limit commercial and 5 year / 1,750 hr. limited deck construction

Deck Shell - 5 year / 1,750 hr. limited deck construction

Commercial - 3 year / no hour limit commercial

3 year / no hour limit commercial and 5 year / 1,750 hr. limited deck construction

Deck Shell - 5 year / 1,750 hr. limited deck construction

Commercial - 3 year / no hour limit commercial

Features

Features

  • LESS MAINTENANCE, LESS DOWNTIME: Maintenance-free spindles and pullys deliver peak performance with limited downtime.
  • DECKS BUILT TO LAST: Tackle the toughest conditions with a triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements.
  • NATIONWIDE SUPPORT: 3-year, no-hour-limit commercial warranty and 5-year,1,750-hour limited deck warranty and a nationwide network of Cub Cadet dealers.
  • CONTROL YOUR OWN WAY.​: Whether you prefer our custom lap bar designs or our innovative steering options, the PRO Z lineup offers you great control to match your crew’s needs.

Features

  • LESS MAINTENANCE, LESS DOWNTIME: Maintenance-free spindles and pullys deliver peak performance with limited downtime.
  • DECKS BUILT TO LAST: Tackle the toughest conditions with a triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements.
  • NATIONWIDE SUPPORT: 3-year, no-hour-limit commercial warranty and 5-year,1,750-hour limited deck warranty and a nationwide network of Cub Cadet dealers.
  • CONTROL YOUR OWN WAY.​: Whether you prefer our custom lap bar designs or our innovative steering options, the PRO Z lineup offers you great control to match your crew’s needs.